Abnormal loads: from exemption to navigation

Three countries, one route

On the exemption page of the app, choose from which country to which country you drive. Then you get the permit for each country, in the order you drive:

• Netherlands: the numberEnter the exemption number. Truckroute fetches the permitted route itself from the RDW Digital Exemptions Road Map.
• Belgium: the PDFChoose the PDF of your permit from AWV, SPW or Brussels. The app reads the itinerary and builds the mandatory route from it.
• Germany: the PDFChoose the PDF of your German permit (VEMAGS). The app reads all routes (Fahrtwege) and picks the route part that fits your trip.

Driving from the Netherlands to Belgium? You first drive the Dutch route, and at its end the Belgian route starts by itself. There is nothing to do on the way.

Netherlands: fetch it with just the exemption number

Truckroute is the only navigation app that lets you navigate with just the RDW exemption number. You do not need an RDW account: the app fetches the permitted route from the public part of the Digital Exemptions Road Map (DWO), exactly the road sections the RDW permitted, in that order. With the route you see:

• The RDW route description, turn by turn, and the route on the map.
• The dimensions in the exemption, loaded and unloaded: length, width, height and weight.
• The escort: per part of the route how many escorts are required and over how many kilometres.
• Roadworks and restrictions on the route in the coming days, with description and duration.
• Every structure on the route: bridges, viaducts and tunnels with the RDW assessment, the clearance height and the weight.

The validity, the carrier, remarks and the number of transports are not public at the RDW; they are in the exemption itself.

Every structure on the route, with margin

An example of a real exemption, fetched on 27-10-2026: a transport 4.50 m wide and 4.25 m high from Elst to Schiphol, 170.3 km over the A325, A15, A50, A12 and A4. Truckroute shows 95 structures assessed by the RDW, 77 viaducts, 15 bridges and 3 tunnels, all suitable for this transport. The lowest is the Kanaalweg viaduct with a clearance height of 4.35 m: 10 cm above the permitted height. Two escorts are required on 2.6 km, one on the other 166.2 km. Tap a structure to see it on the map, in its place in the permitted route.

Besides the structures of the exemption, Truckroute knows every bridge, viaduct, tunnel and level crossing in the Netherlands, more than 15,000.

On the way: every structure announced in time

While you drive, Truckroute announces every structure for which your exemption sets a passage condition: at 2 km with the condition, again at 500 m and at the structure itself. You see the name, the hectometre and the text from the exemption, and the structure is on the map. More about the navigation.

Belgium: read in the permit as a PDF

For Belgium, choose the PDF of your exceptional transport permit from the Agentschap Wegen en Verkeer (AWV), the Service public de Wallonie (SPW) or Brussels. The app reads the itinerary from the PDF and builds the mandatory route from it. You see until when the permit is valid, the load, whether the itinerary only applies one way and every structure along the route, with the name, the road, the municipality and the instruction from the permit. A place in the itinerary the app cannot locate with certainty is named: check it on the map before you leave.

Driving in Belgium without a permit of your own? Then choose the Belgian exceptional transport network up to 90 or up to 120 tonnes. The route tells you at which border crossing you enter Belgium and whether the Belgian part is on the network.

Germany: read in the permit

For Germany, choose the PDF of your permit (Bescheid) from VEMAGS. The app reads all routes (Fahrtwege) and nodes from the permit and right away picks the route part (Fahrtwegteil) that fits your country of departure and arrival, so you have a route straight after reading it in. Driving another part? Pick another route part from the list. If the permit has more starting points or destinations for this trip, the app asks where you start and where you are going. The number of conditions (Auflagen) is shown.

On the way in Germany: every Auflage on screen

Before departure you see the driving times from the permit and what to register in advance. On the way, Truckroute announces every Auflage as it is in the permit: with the lane, the WVZ installation, whether it only applies at night and the drawing of the safety measures. With Run through the trip in advance you see the whole trip before you leave. More about the navigation.

Cross-border: before, between and after the permit

Switch on Cross-border for abnormal loads in the vehicle profile and the exemption page shows the choice of country of departure and arrival. Switched off, you only see the Dutch exemption number: that keeps it simple when you only drive in the Netherlands.

Not every part of a trip needs a permit. Per country you choose permit or network: in the Netherlands the indivisible load network, with the weight from your vehicle profile, in Belgium the network up to 90 or 120 tonnes. If the network comes before the permit, you drive from where you are over the network to the start of the permit, and the permit route starts there by itself. If it comes after, you choose the destination and the app takes you on over the network after the permit.

Navigating without ever deviating

Start navigation and Truckroute guides you along the permitted route, with voice guidance, the lanes at every exit, the overhead signs on the motorway and your arrival time. On your iPhone or Android phone, and on the screen in the cab with Apple CarPlay.

The route follows your permit 100% and the navigation never deviates from it, not even for a traffic jam or a closure: you only get those as a warning. If you do leave the route, Truckroute guides you back to the point where you left it, never further along. If you are not at the starting point, you drive there first; the permitted route only begins at the starting point.

Roadworks updated every half hour, with the width

Truckroute synchronises the roadworks on the motorways in the Netherlands and Germany every 30 minutes. For each road section with roadworks you see the width that remains during the works, where the road authority provides it.

• In the route overview every roadworks section on your route is shown with its width, in red if it is narrower than your vehicle. With the Passable width filter (narrower than 6, 5 or 4 m) you keep only the narrow stretches.
• With your exemption or permit the roadworks on the permitted route are shown with their width.
• Under Roadworks in the menu you see the roadworks that are in progress now, per country.

Map layers for abnormal loads

Under Map layers you find the layers you want to see on a trip with a large or heavy transport:

• Structures: bridges, viaducts and tunnels to tap, with height and, in Belgium, the instruction from the permit.
• Exceptional transport Belgium: the network up to 90 and up to 120 tonnes, obstacles, roadworks and accommodation.
• Truck parks, including the car parks in Belgium that are suitable for exceptional transport.
• Inside or outside the network: at the bottom next to the signs, also in CarPlay, a green or red sign showing whether you are on the network for special transport.

Save for later

Driving the same permit more often? Save it. You give it your own name, for example the customer or the load, and pick it next time with one tap on the exemption page. A combination of countries, such as a Dutch exemption number with a Belgian permit, is saved as one whole. Change the name with the pencil, delete it with the bin. You can save up to 15. If the app cannot fetch a permit fresh, it uses the saved version and tells you from which date it is.

No exemption yet? Plan within the decision space

Want to know first which roads a transport can use? Enter the dimensions in the route planner. Truckroute then only plans over roads where the RDW itself can grant an exemption for that height, width, length and weight. At 4.4 m high, 3.5 m wide, 25 m long and 60 tonnes, the trip from the Prins Clausplein to Oudenrijn goes via the A4, the A10 and the A2: 90.8 km (calculated on 15-10-2026). More about planning within the decision space.

The permit remains binding

Truckroute does not apply for an exemption or permit and does not replace it. The app follows the route from the permit as precisely as the data allows; in case of a difference, the permit itself always prevails, with its conditions and the instructions of the escort and the road authority.

Read also

• Navigation for abnormal loads: Navigate abnormal loads along your permit: every structure with its passage condition, and the German Auflagen with plan and lane.
• Route for abnormal loads: Enter the dimensions of your transport and Truckroute plans over the roads where the RDW can grant an exemption for them: height, width, length and weight.
• Exemption for abnormal loads: annual or one-off: Annual exemption up to 27.50 m, 3.50 m, 4.25 m and 100,000 kg on the green roads, or a one-off exemption per route. How to choose, and how to plan the route.
• Plan a route over the RDW exemption roads (DWO): See which roads in the RDW DWO are green for your dimensions, and let Truckroute plan a door-to-door route over them straight away.
• Route for a mobile crane: For the RDW a mobile crane is a self-propelled machine: annual exemption up to 100,000 kg, only on green roads. How to plan the route with Truckroute.